Mimas Artix 7 FPGA Development Board

Programming Mimas A7 using OpenOCD and XC3SProg

40 views November 22, 2018 Jyothi AS 0

Programming Mimas A7 using OpenOCD What is OpenOCD? OpenOCD stands for Open On-Chip Debugger. It is an open-source software that supports debugging a wide variety of chips, devices and boards using [...]

HDMI Output Example Design using Vivado for Mimas A7 FPGA Development Board

233 views September 17, 2018 Vijaya Lakshmi 1

Introduction: HDMI (High-Definition Multimedia Interface) is an audio/video interface for transmitting uncompressed video data and compressed or uncompressed digital audio data from an HDMI-[...]

Mimas A7, Microblaze And Linux: How To Boot Linux On Mimas Artix 7 FPGA Development Board From SPI Flash

174 views September 14, 2018 Vijaya Lakshmi 0

In the previous article, we saw how to build Linux Kernel and run it on Mimas Artix 7 FPGA Development Board using Xilinx Platform Cable USB and XSCT console. Though this is the easier method, t[...]

Mimas A7, Microblaze And Linux: How To Run Linux On Mimas A7 FPGA Development Board

260 views September 14, 2018 Vijaya Lakshmi 1

Introduction FPGAs are best known for their flexibility and versatility. Such flexibility allows FPGAs not only to be used for custom logic circuits but also implement a processor on it and even run [...]

Gigabit Ethernet Example Design using Vivado for Mimas A7 FPGA Development Board

326 views September 12, 2018 Vijaya Lakshmi 1

Introduction: Ethernet is a Link Layer Protocol in the TCP/IP protocol stack between the physical and data link layer. It is the most widely used protocol for Local Area Networks (LANs). Every devi[...]

Vivado Design Suite – Create Microblaze based design using IP Integrator With Mimas A7 FPGA development board

210 views September 4, 2018 Vijaya Lakshmi 0

Introduction Vivado Design Suite is developed by Xilinx and is used for the synthesis and analysis of HDL design with additional features for SOC development and high-level synthesis. Xilinx recommen[...]