FT232RL Breakout Module

$9.99

Numato Lab’s FT232RL Breakout is a versatile product for a USB to serial UART interface. This board can be used with Arduino/any microcontroller which supports serial communication.
Features

  • Data transfer rates from 300 baud to 3M baud (RS422, RS485, RS232) at TTL levels
  • Entire USB protocol handled on the chip. No USB specific firmware programming required
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers
  • Transmit and receive LED indication

 

Applications

  • USB to RS232/RS422/RS485 Converters
  • Interfacing MCU/PLD/FPGA based designs to USB
  • USB Instrumentation

In stock

SKU: FT232RLBRK01 Category:

Description

Numato Lab’s FT232RL Breakout is a versatile product for a USB to serial UART interface. This board can be used with Arduino/any microcontroller which supports serial communication. The FTDI UART Interface and CBUS group pins can be configured for 3V3/5V, so it is compatible with microcontrollers with both TTL logic. Major advantage of this board is, it can be controlled without any USB specific firmware programming since the entire USB protocol handled by the chip itself.

 

Applications

  • USB to RS232/RS422/RS485 Converter
  • Interfacing MCU/PLD/FPGA based designs to USB
  • USB Instrumentation

Additional information

Weight 0.10 lbs
Dimensions 5.00 x 3.00 x 2.00 in
Communication

USB, Serial

Device

FT232RL

Downloads

User Manual

Accessories

USB A to mini B Cable 5 FootUSB A to Mini B cable 5 FootUSB type A to Mini B 5-pin cable. Can be used with many USB products available from Numato Lab.5 Foot (1.5 Meters) length.

Reviews

There are no reviews yet.

Be the first to review “FT232RL Breakout Module”

You may also like…