Skoll – Kintex 7 FPGA Development Board

$399.95

Features

Xilinx Kintex 7 FPGA  USB 2.0 Host Interface    Upto 150 User IOs    DDR SDRAM For Temporary Data Storage   Built In Configuration System

Applications

OEM Integration  Acceleration  Evaluation  ResearchResearch

Skoll is an easy to use USB FPGA module with DDR3 SDRAM featuring Xilinx Kintex 7 FPGA. With the compact form factor and IO accessibility on industry standard 2.54mm (100mil) headers, Skoll is a great choice for embedding FPGA, DDR3 and USB in your system with ease. With Skoll, the complex parts of the design are already taken care for you so you can focus on your own application and achieve faster time to market.

Why skoll?

  • Designed for OEM Integration
  • ROHS certification available
  • USB, FPGA and DDR3 in very compact form factor
  • Industry standard 100mil (2.54mm) headers for IO access
  • Built in configuration system
  • Single power rail operation
  • Up to 150 user IOs
  • Length matched differential IO pairs
  • XoBus-Lite compatible
  • Documentation, Reference Designs and KB articles
Clear
SKU: FPGA010 Category:

Description

Skoll is an easy to use FPGA Development board featuring Kintex 7 FPGA. It is specially designed for development and integration of FPGA based accelerated features to other designs. This development board features Xilinx XC7K70T FPGA with FTDI’s FT2232H Dual-Channel USB device. The high speed USB 2.0 interface provides fast and easy configuration download to the on-board SPI flash. No programmer or special down loader cable is needed to download the bit stream to the board. The second FTDI channel can be used to develop custom high data-rate USB based applications. Skoll provides user flexibility in adding their own peripherals though IO Expansion Headers.
 
Features

  • FPGA: XC7K70T in FBG484 package, Speed Grade: 1
  • DDR3: 2Gb DDR3 (MT41J128M16HA-125:K)
  • Flash memory: 128 Mb Quad bit SPI flash memory (N25Q128A13EF840E)
  • 100MHz CMOS oscillator
  • High Speed USB 2.0 interface for On-board flash programming. FT2232H Channel A is dedicated for SPI Flash /JTAG Programming. Channel B can be used for custom applications.
  • On-board voltage regulators for single power rail operation
  • FPGA configuration via JTAG and USB
  • Maximum IOs for user defined purposes
  • FPGA – 150 IOs, FT2232H – 8 IOs

 
Applications

  • Product Prototype Development
  • Accelerated computing integration
  • Development and testing of custom embedded processors
  • Signal Processing
  • Communication devices development
  • Educational tool for Schools and Universities

Additional information

Weight 0.12 lbs
Dimensions 5.00 x 3.00 x 2.00 in
FPGA

Memory

Number Of GPIOs (Max)

150

Configuration Options

JTAG, USB

Primary Clock Frequency

Host Interface

USB 2.0

Downloads

User Manual
XDC File For Vivado Designs
Configuration Tool (Windows)
Skoll BSP

Accessories

IO Breakout Module for SaturnIO Breakout Module for SaturnThis board is an IO breakout solution for Saturn Sparta6 development board. This product allows Saturn IOs to be broken out in to smaller 2x6 headers that would facilitate easy attachment of other peripheral expansion modules. The board features four 2×6 expansion connector. The traces are length matched.
AD9283 ADC Expansion ModuleAD9283 ADC Expansion ModuleAD9283 ADC module features AD9283 an 8-bit monolithic sampling analog-to-digital converter with an on-chip track and hold circuit. The maximum conversion rate is at 100 MSPS, with outstanding dynamic performance over its full operating range. This module is designed to be used with Numato Lab’s FPGA/Micro-controller boards featuring a 2x6 pin Expansion connector. It can also be used with other boards and connector types by using manual wiring.
LM4550 AC'97 Stereo Audio Codec Expansion ModuleLM4550 AC'97 Stereo Audio Codec Expansion ModuleThis module features LM4550, an AC'97 Rev 2.1 compliant audio codec which enables producing and recording high quality stereo audio. This module is designed to be used with Numato Lab’s FPGA/Microcontroller boards featuring a 2x6 pin Expansion connector. It can also be used with other boards and connector types by using manual wiring.
HDMI Transmitter Expansion ModuleHDMI Transmitter Expansion ModuleIP4776CZ38 HDMI Module features a buffered DVI-D/HDMI interface with HDMI buffer IP4776CZ38 for better signal strength and signal integrity. The on board DVI-D/HDMI interface can be used to generate high quality HD video up to 1080p. This module is designed to be used with Numato Lab’s FPGA boards featuring a 2×6 pin Expansion connector. It can also be used with other boards and connector types by using manual wiring.

Knowledge Base

Vivado Design Suite Create Microblaze based design using IP Integrator With Skoll Kintex 7 FPGA Module
How to run Linux on Skoll Kintex 7 FPGA Module
How To Boot Linux On Skoll Kintex 7 FPGA Module from SPI Flash

Sample Code

NameLanguage/TechnologyIDEHardware Modules Required
16x2 LCD DisplayVerilogXilinx Vivado Saturn IO Breakout Module
Alphanumeric LCD Display Expansion Module
LEDsVerilogXilinx Vivado Saturn IO Breakout Module
LED Expansion Module - 8 LEDs
Push Button SwitchVerilogXilinx VivadoSaturn IO Breakout Module
Push Button Switch Expansion Module
Seven Segment LED DisplayVerilogXilinx Vivado Saturn IO Breakout Module
Seven Segment LED Display Expansion Module
8Bit VGAVerilogXilinx Vivado Saturn IO Breakout Module
VGA Display Expansion Module
CS4344 Stereo AudioVerilogXilinx Vivado Saturn IO Breakout Module
CS4344 Audio Expansion Module
HDMI TransmitterVHDLXilinx Vivado Saturn IO Breakout Module
HDMI Transmitter Expansion Module

Reviews

There are no reviews yet.

Be the first to review “Skoll – Kintex 7 FPGA Development Board”

You may also like…